Agriculture
	Econo Mill 920
	Multi-Mix
	Multi-Mix Dairy
	Grain Distributor Controls
	Handling Systems
	Pump controllers
	Wastewater Pumping
	Industrial Starters
	Millennium Serie
	Industrial OEM
	Programming of Programmable Logic Controllers (PLC)
	Exclusive Distributor
	LucaSystem PVC enclosures
	Filsa Membrane level controllers
	Filsa Rotary blade level controllers

FILSA Rotary blade level controllers   

Rotary blade level controller, made by FILSA, is the solution to control filling and unloading operations of bulk material in a storage silo. With those level controllers, equipment such as conveyor or elevator will always start and stop at the right time!

These controllers are maintenance free and no calibration is required even if the stored material characteristics changes. They operates regardless of product moisture contents (as long as material remains in a free flowing state).

The operation of these controllers is centered around a synchronous, slow speed motor-gear unit. The blades, operated by a shaft with twin support bearings and a protective clutch. When the product reaches the blade, and the blade finds resistance to its rotation, the motor-gear unit rotates on its own axis, actuating two micro switches; one of them disconnects the motor and the other acts upon the control mechanisms, stopping or starting signaling systems, conveyor belts, elevators, feeders, etc. Once the blades are free of product, the motor-gear unit is reconnected and the control signals are reversed.

Several different models are available including the most popular models, the IRP-R model, equipped with a single blade and the IR-180 model, equipped with 4 blades.

IRP-R Series
Construction	Operating Temperature	Power supply	Control Contact
Housing and cover reinforced ABS Axis and blade Stainless steel	Standard: -20°C to +60°C (-5 to 140 °F)	Standard 120V 3VA 50-60 Hz. Other available: 24, 48 et 230V	Single Pole Double Throw (SPDT) contact, 10A 250V
Cut out delay		Certifications	Weight
2 sec (Approx.)		Certified CE, CSA, cCSAus Protection : IP-65	800g (approx.)

 

IR-180 Serie
Construction	Operating Temperature	Power supply	Control Contact
Housing and cover Cast aluminium Axis and paddles Stainless steel	Standard: -20°C to +80°C (-5 to 175°F) Option: +150°C (300°F)	Standard 120V 3VA 50-60 Hz. Other available: 24, 48 et 230V	Single Pole Double Throw (SPDT) contact, 15A 250V
Cut out delay		Certifications	Weight
2 sec (Approx.)		Certified CE, CSA, cCSAus Protection : IP-65 Homologated to be used in hazardous locations: classified as Class II, Division 1, F & G group	2.5 to 3.0 kg depending upon the paddles or flange provided